Electrical Safety Tips That Everyone should know | DM Electric

Most people don’t think about electricity safety until something bad happens. Electrical safety is something that everyone can benefit from, no matter what your age or profession. Here We at DM Electric are sharing five electrical safety tips to keep in mind.

Use electrical outlets with ground fault circuit interrupters

It is important to use electrical outlets that have ground fault circuit interrupters (GFCIs) in your home. These devices are designed to automatically shut off power if there is a short circuit or surge of electricity. This means that if you are using an appliance with a plug, such as a hairdryer, and it falls into the sink where water can get close enough to electrocute you, then the GFCI will detect this and turn off the power. These devices save lives!

Keep your fingers away from the opening and closing parts of an electric appliance

One of the most common safety mistakes is not following basic electrical safety procedures. More than 50% of injuries in the home are related to electricity and about 20% of those injuries are a result of contact with an electric appliance or power tool. This blog post will talk about some tips for keeping your fingers away from the opening and closing parts on an electric appliance.

Prevention: Never touch these parts when they are plugged in or unplugged unless you have been trained by a qualified professional to do so. If there is any chance that it may be live, call an expert to make sure it’s safe before doing anything else!

Turn off the power at the main breaker when working on any electrical circuits in or near water

If you are looking for a way to reduce the risk of electrical accidents in your home, you should know that it’s not just about wearing rubber gloves while doing repairs. You also need to turn off the power at the main breaker before working on any electrical circuits. This is especially important if you have kids or pets who might come into contact with exposed wiring. There is no time limit for how long electricity can stay on after turning it off, which could potentially be very dangerous! Making sure all power sources are turned off will help keep everyone safe and reduce liability risks.

If there was an accident when working on a circuit, it might be hard to determine what caused it because of the lack of evidence left behind from having had power.

Never use a cord that has been damaged, even if it is still connected to an outlet.

It can be tempting to use a cord that has been damaged, even if it is still connected. Many people don’t know the dangers of just plugging their phone in with a cord that looks fine but has been frayed and exposed at the ends or had its insulation worn away. There are many hazards associated with this type of behavior, including shock and fire hazards.

Don’t overload outlets with too many plugs — use power strips instead

I’ve seen a lot of people with power strips tucked in the corner of their living room or under their desks. It’s time to stop hiding your power strip and start using it! The benefits are too good not to.

It’s a common misconception that you can just plug in your phone charger, laptop charger, and other electronics into an outlet. However, this is far from the truth. The power supply of each device will be compromised if too many devices are plugged into one outlet. To avoid this problem, make sure to use power strips with outlets for each device to avoid any oversights or malfunctions when charging your devices.

We’re the best Commercial Electrical Contractor in York, PA and we’ve provided you with five electrical safety tips for everyone. Be sure to follow these simple rules so that you can safely enjoy your appliances without worrying about an accident or injury occurring. Which of these did you know? Does this list even seem like something worth reading? If not, don’t worry! You’ll find plenty more helpful articles on our blog.